In order to meet the requirements of high-speed Internet, video, entertainment, fairy tales and other requirements in your residence at anytime and anywhere, it is suggested that the basic mode of home network wiring used in home decoration is as follows:
Home information box or network convergence point should not be set in wet greasy position, and try to choose to install in the home wireless coverage better position.
In order to facilitate access in different locations, each room and functional areas inside the house should have five lines reach the home information box or network sink, and the installation of the cable outlet, the family consists of LAN, in order to achieve resource sharing.
If need to install the TV - residential location should be set to the cable outlet, and separate laying five lines to the home information box or network sink, so as to meet the needs of each TV to watch the IPTV show.
The living room, bedroom, library should install the phone socket; toilet and kitchen can be set up according to the needs of the phone socket, telephone socket should be placed to the home telephone line or network information box sink.
The installation height of each socket is: toilet, kitchen is 1000-1300mm away from the floor, and the rest is 300mm away from the floor. On the basis of the above home network routing basic methods, the following three different scenarios of home wiring mode, for your reference:
Scene 1: developers have already used the family information box structure size or larger family information box recommended by telecom.
The FTTH network and home network terminal equipment installed in the home information box; residential telephone line, five lines adopt star type wiring way, and converged to the home information box; if you love to use wireless Internet, please AP from the wireless installation position of the installation of 1 five lines to the home information box and power supply socket (for the power supply of wireless AP equipment). Typical wiring diagram is as follows:
Illustration: fiber in one fell swoop, enjoy the whole family together! High speed internet access, HD IPTV...... OK no problem!
Scene two: structure and size of home information box cannot be installed when the developer submitted to meet the requirements or for various other reasons can not use the home information box now, while you are in the decoration in other locations (such as a study, etc.) home information box to install a telecommunications recommended home information box structure size or larger size.
The FTTH network and home network terminal equipment installed in the new home information box; residential telephone line, five lines adopt star type wiring way, and gathered information box of the family; if you love to use wireless Internet, please install the AP 1 wireless location from laying five lines to the home information box. (for the power supply and power supply socket wireless AP device).
In general, a cable has been put into the home information box of the original, so you need in the decoration between the two home information box embedded with a diameter of not less than 20mm of the underground pipe, and the pipe laying in at least 1 five lines, the underground pipe laying in, and the blocking phenomenon please do not have direct bending and pipeline damage. Typical wiring diagram is as follows:
Scene three: the existing home information box structure size can not meet the requirements, and your home phone line, five kinds of lines have converged to the family information box, but your two decoration is reluctant to replace the family information box.
In general, the FTTH network terminal and home network equipment are installed on the cabinet near the existing home information box (need to provide power outlets, equipment installation location, and put the home fiber optic cable cloth to the place. Typical wiring diagram is as follows